Updated Jun-2026 Exam 300-715 Dumps - Pass Your Certification Exam
Latest Real Cisco 300-715 Exam Dumps Questions
Cisco 300-715 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Cisco ISE is a comprehensive security policy management platform that enables organizations to enforce security policies across their network infrastructure. It provides a centralized platform for network access control, policy enforcement, and identity management. The Cisco 300-715 exam tests the candidate's understanding of the technologies and protocols used in Cisco ISE, such as 802.1X authentication, TACACS+, RADIUS, and posture assessments. Passing 300-715 exam is a crucial step towards earning the CCNP Security certification and demonstrates the candidate's expertise in Cisco ISE solutions.
NEW QUESTION # 13
Drag and Drop Question
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_8021x/configuration/xe-3se/3850/sec- user-8021x-xe-3se-3850-book/config-ieee-802x-pba.html
NEW QUESTION # 14
Refer to exhibit.
Refer to the exhibit. An engineer must configure BYOD in Cisco ISE. A single SSID must be used to allow BYOD devices to connect to the network. These configurations have been performed on Wireless LAN Controller already:
RADIUS server
BYOD-Dot1x SSID
Which two configurations must be done in Cisco ISE to meet the requirement? (Choose two.)
- A. FlexConnect ACL
- B. Authentication policy
- C. External identity source
- D. Profiling policy
- E. Redirect ACL
Answer: B,E
NEW QUESTION # 15
An engineer is adding a new network device to be used with 802.1X authentication. After configuring the device, the engineer notices that no endpoints that connect to the switch are able to authenticate. What is the problem?
- A. The switch's supplicant is unable to establish a connection to Cisco ISE.
- B. The command dot1x system-auth-control is not configured on the switch.
- C. The command dot1x critical vlan 40 is not configured on the switch ports.
- D. The endpoint firewalls are blocking the EAPoL traffic.
Answer: B
NEW QUESTION # 16
An engineer is using profiling to determine what access an endpoint must receive. After configuring both Cisco ISE and the network devices for 802.1X and profiling, the endpoints do not profile prior to authentication.
What are two reasons this is happening? (Choose two.)
- A. The SNMP probe is not enabled.
- B. Closed mode is restricting the collection of the attributes prior to authentication.
- C. The switch is collecting the attributes via RADIUS but the probes are not sending them.
- D. NetFlow is not enable on the switch, so the attributes will not be collected.
- E. The HTTP probe is malfunctioning due to closed mode being enabled.
Answer: B,C
NEW QUESTION # 17
An engineer is configuring 802.1X and wants it to be transparent from the users' point of view. The implementation should provide open authentication on the switch ports while providing strong levels of security for non-authenticated devices. Which deployment mode should be used to achieve this?
- A. open
- B. low-impact
- C. high-impact
- D. closed
Answer: B
Explanation:
https://www.lookingpoint.com/blog/cisco-ise-wired-802.1x-deployment-monitormode#:~:text=Low%20impact%20mode%20works%20similar,DHCP%2C%20PXE%20boot%2C%20etc.
NEW QUESTION # 18
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. aaa authentication dot1x default group radius
- B. dot1x system-auth-control
- C. authentication port-control auto
- D. dot1x pae authenticator
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/dot1x.
html#wp1133395
NEW QUESTION # 19
During a 802 1X deployment, an engineer must identify failed authentications without causing problems for the connected endpoint. Which command will successfully achieve this''
- A. dotlxsystem-auth-control
- B. authentication open
- C. authentication port-control auto
- D. dotlx pae authenticator
Answer: D
NEW QUESTION # 20
Refer to the exhibit.
An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?
- A. The authorization policy doesn't correctly grant them access to the finance devices.
- B. The authorization conditions wrongly allow IT Admins group no access to finance devices.
- C. The IT training rule is taking precedence over the IT Admins rule.
- D. The finance location is not a condition in the policy set.
Answer: A
NEW QUESTION # 21
An engineer is configuring Cisco ISE policies to support MAB for devices that do not have 802.1X capabilities. The engineer is configuring new endpoint identity groups as conditions to be used in the AuthZ policies, but noticed that the endpoints are not hitting the correct policies. What must be done in order to get the devices into the right policies?
- A. Manually add the MAC addresses of the devices to endpoint ID groups in the context visibility database.
- B. Create an AuthZ policy to identify Unknown devices and provide partial network access prior to profiling.
- C. Identify the non 802.1 * supported device types and create custom profiles for them to profile into.
- D. Add an identity policy to dynamically add the IP address of the devices to their endpoint identity groups.
Answer: A
NEW QUESTION # 22 
Refer to the exhibit Which component must be configured to apply the SGACL?
- A. ingress router
- B. secure server
- C. host
- D. egress router
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/trustsec/configuration/guide/trustsec/arch_over.
html#52796
NEW QUESTION # 23
Which Cisco ISE service allows an engineer to check the compliance of endpoints before connecting to the network?
- A. qualys
- B. nexpose
- C. personas
- D. posture
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010110.html Posture is a service in Cisco Identity Services Engine (Cisco ISE) that allows you to check the state, also known as posture, of all the endpoints that are connecting to a network for compliance with corporate security policies. This allows you to control clients to access protected areas of a network.
NEW QUESTION # 24
A network engineer is configuring a Cisco WLC in order to find out more information about the devices that are connecting. This information must be sent to Cisco ISE to be used in authorization policies. Which profiling mechanism must be configured in the Cisco WLC to accomplish this task?
- A. CDP
- B. SNMP
- C. DHCP
- D. DNS
Answer: B
NEW QUESTION # 25
What should be considered when configuring certificates for BYOD?
- A. An Android endpoint uses EST whereas other operation systems use SCEP for enrollment
- B. The CN field is populated with the endpoint host name.
- C. The SAN field is populated with the end user name
- D. An endpoint certificate is mandatory for the Cisco ISE BYOD
Answer: D
NEW QUESTION # 26 
Refer to the exhibit. Which command is typed within the CLI of a switch to view the troubleshooting output?
- A. show authentication sessions method
- B. show authentication interface gigabitethernet2/0/36
- C. show authentication registrations
- D. show authentication sessions mac 000e.84af.59af details
Answer: D
Explanation:
Section: Policy Enforcement
NEW QUESTION # 27
Which permission is common to the Active Directory Join and Leave operations?
- A. Create a Cisco ISE machine account in the domain if the machine account does not already exist
- B. Remove the Cisco ISE machine account from the domain.
- C. Search Active Directory to see if a Cisco ISE machine account already ex.sts.
- D. Set attributes on the Cisco ISE machine account
Answer: C
NEW QUESTION # 28
Which two events tngger a CoA for an endpoint when CoA is enab.ed globally for ReAuth?
(Choose two.)
- A. endpoint marked as lost in My Devices Portal
- B. endpoint profile transition from Unknown to Windows 10-Workstation
- C. updating of endpoint dACL.
- D. addition of endpoint to My Devices Portal
- E. endpoint profile transition from Aop.e-dev.ee to App.e-iPhone
Answer: B,E
NEW QUESTION # 29
A network administrator must use Cisco ISE to check whether endpoints have the correct version of antivirus installed Which action must be taken to allow this capability?
- A. Create a Cisco AnyConnect configuration within Cisco ISE for the Compliance Module and associated configuration files
- B. Configure Cisco ISE to push the HostScan package to the endpoints to check for the antivirus version.
- C. Configure a native supplicant profile to be used for checking the antivirus version
- D. Create a Cisco AnyConnect Network Visibility Module configuration profile to send the antivirus information of the endpoints to Cisco ISE.
Answer: D
NEW QUESTION # 30
In a Cisco ISE split deployment model, which load is split between the nodes?
- A. network admission
- B. AAA
- C. device admission
- D. log collection
Answer: B
Explanation:
In split Cisco ISE deployments, you continue to maintain primary and secondary nodes as described in a small Cisco ISE deployment. However, the AAA load is split between the two Cisco ISE nodes to optimize the AAA workflow. Each Cisco ISE appliance (primary or secondary) needs to be able to handle the full workload if there are any problems with AAA connectivity.
Neither the primary node nor the secondary nodes handles all AAA requests during normal network operations because this workload is distributed between the two nodes.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
4/install_guide/b_ise_InstallationGuide24/b_ise_InstallationGuide24_chapter_00.html
NEW QUESTION # 31
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? ()
- A. posture
- B. new AD user 802 1X authentication
- C. guest AUP
- D. hotspot
- E. BYOD
Answer: C,D
NEW QUESTION # 32
An engineer must configure web redirection for guests to a portal where no authentication is required and an Acceptable Use Policy must be accepted by the guest before network access is allowed. Which type of guest portal must be configured in Cisco ISE to meet the requirement?
- A. Hotspot
- B. Self Registered
- C. Sponsored
- D. Custom
Answer: A
NEW QUESTION # 33
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
Explanation:
https://netlabz.wordpress.com/2016/09/24/cisco-ise-fundamentals/
NEW QUESTION # 34
Refer to the exhibit.
An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?
- A. The authorization policy doesn't correctly grant them access to the finance devices.
- B. The authorization conditions wrongly allow IT Admins group no access to finance devices.
- C. The IT training rule is taking precedence over the IT Admins rule.
- D. The finance location is not a condition in the policy set.
Answer: D
NEW QUESTION # 35
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE. What must be configured within Cisco ISE to accomplish this goal?
- A. Add an OCSP profile and configure the root certificate authority as secondary.
- B. Add the root certificate authority to the trust store and enable it for authentication.
- C. Create an SCEP profile to link Cisco ISE with the root certificate authority.
- D. Create a certificate signing request and have the root certificate authority sign it.
Answer: C
Explanation:
Reference:
Ref:https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html
NEW QUESTION # 36
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. aaa authentication dot1x default group radius
- B. dot1x system-auth-control
- C. authentication port-control auto
- D. dot1x pae authenticator
Answer: B
NEW QUESTION # 37
......
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Web Auth and guest services
The following will be discussed in CISCO 300-715 exam dumps:
- Closed mode
- Configure policies including authentication and authorization profiles
- Low impact
- Monitor mode
- Configure network access devices
- Configure Cisco TrustSec
300-715 Dumps To Pass CCNP Security Exam in One Day: https://itexams.lead2passed.com/Cisco/300-715-practice-exam-dumps.html
