H12-211 Actual Questions - Instant Download Tests Free Updated Today!
Get instant access of 100% real Huawei H12-211 exam questions with verified answers
Huawei H12-211 certification exam is designed for individuals who want to gain a strong understanding of Huawei networking technology and devices. Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD) certification is ideal for those looking to gain a foundational knowledge of Huawei datacom products and solutions. H12-211 exam is designed to test candidates on their knowledge of basic network technologies, IP network principles, routing and switching technologies, and Ethernet technologies.
Huawei H12-211 is a certification exam offered by Huawei, one of the leading global providers of information and communication technology (ICT) solutions. Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD) certification exam is designed to validate the skills and knowledge of professionals in the field of data communications and networking technology. The Huawei H12-211 exam is also known as the Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD) exam.
Huawei H12-211 certification exam offers ample career opportunities for individuals who pass the test. Certified professionals can get jobs ranging from system engineers, IT consultants, network administrators, and network engineers. Additionally, a significant number of organizations prefer certified professionals to those without any certification. Candidates who pass the exam can be sure to get the attention of potential employers and take their careers to the next level.
NEW QUESTION # 44
Which of the following statements is true about the MAC address table of a switch?
- A. The switch discards the data frame whose source MAC address is 5489-9811-0b49.
- B. The switch discards the data frame whose destination MAC address is 5489-989d-1d30.
- C. The switch discards the data frame whose destination MAC address is 5489-9885-18a8.
- D. The switch discards the data frame whose destination MAC address is 5489-9811-0b49.
Answer: C
NEW QUESTION # 45
VRP, the following statement regarding the correct RIP route aggregation is
- A. RIP V2 support sub-network aggregation
- B. RIP V1 does not support CIDR
- C. RIP V1 default support for route aggregation, routing aggregation can be turned off when needed Function
- D. RIP V2 support off route aggregation
Answer: A,B,D
NEW QUESTION # 46
As shown in the following figure. Router A and Router B establish an OSPF neighbor relationship. The OSPF process ID of Router A is 1 and the area ID is O.
Which of the following methods can enable Router B to obtain the route of the network segment where Host A is located? (Multiple Choice)
- A. ospf t area 0.0.0.0 network 192.168.1.00.0.0.255 0
- B. ospf 1 import-route direct 0
- C. ospf 1 area 0.0.0.0 network 192168.0.00.0.255 255
- D. ospf 1 area 0 0 0 0 network 192 168 1.2 0.0.0.0 0
Answer: A,B,C,D
NEW QUESTION # 47
On the VRP platform, if you want the ping program to use the specified IP address as the source address of the echo request message, which of the following can be used?
One parameter?
- A. -s
- B. -d
- C. -a
- D. -n
Answer: C
NEW QUESTION # 48
The following description of static and dynamic routing errors is ().
- A. Dynamic routing protocols take up more system resources than static routes
- B. Static routing is simple to configure and easy to manage when applied in an enterprise.
- C. After a link fails, static routes can automatically complete network convergence.
- D. After administrators deploy dynamic routing protocols in the enterprise network, post-maintenance and expansion can be more convenient.
Answer: C
NEW QUESTION # 49
Which of the following routing protocol prefrence can be modified?
- A. Static routing
- B. Direct routing
- C. OSPF
- D. RIP
Answer: A,C,D
NEW QUESTION # 50
The correct DD packet and LSA description for OSPF middle age is (). (multiple choice)
- A. The DD packet contains only the header information of the LSA.
- B. The DD message contains the details of the LS
- C. The head of the LSA can uniquely identify an LSA
- D. LSA head is just a small part of the LSA
Answer: A,C,D
NEW QUESTION # 51
All interfaces on a router belong to the same broadcast domain.
- A. False
- B. True
Answer: A
NEW QUESTION # 52
IPsec VPN can only encrypt and trAns mit unicast data, and GRE can encapsulate multicast data
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 53
On the network shown in the figure, all routers run OSPF and the cost value is marked above the link. What is the cost value of the route to 10.0.0.0/8 in the routing table of RA?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 54
Whilst configuring a device, an administrator experiences trouble remembering certain commands.
Which of the following will help support the administrator? (Choose two)
- A. ctrl+c
- B. question mark
- C. ctrl+b
- D. TAB
Answer: B,D
NEW QUESTION # 55
Which of the following statement about the priority of static routes in Huawei devices is incorrect?
- A. The priority value of the static route is 255, indicating that the route is unavailable.
- B. The priority of static routes is divided into internal priority and external priority. Administrators can modify external priority
- C. The default value of static route priority is 60.
- D. The static route priority value ranges from 0 to 255.
Answer: D
NEW QUESTION # 56
When deploying an ACL on a Huawei device, the following description is correct (). (multiple choice)
- A. The same ACL can be called under multiple interfaces
- B. Calling an ACL under an interface can only be applied to the exit direction.
- C. ACLs can only define rules in the order of 10, 20, and 30.
- D. ACLs cannot be used to filter OSPF traffic because OSPF traffic is not encapsulated using UDP protocol
- E. The ACL can match the TCP/UDP port number of the packet, and can specify the range of the port number.
Answer: A,E
NEW QUESTION # 57
Set interface link layer protocol is X.25, and specify the work order is for the DTE
- A. [RouterA-Serial1/0/0] link-protocol x.25 dte
- B. [RouterA-Serial1/0/0] link-protocol x25 dte
- C. [RouterA-Serial1/0/0] link-protocol x25 dce
- D. [RouterA-Serial1/0/0] link-protocol x.25 dce
Answer: B
NEW QUESTION # 58
The LACP Priority is shown in the figure. Switch A and Switch B adopt link aggregation in LACP mode, All interfaces are added to link aggregation group (LAG), and the maximum number of active port is set to
3.Which port of switch A is not an active port?
- A. G0/0/0
- B. G0/0/2
- C. G0/0/3
- D. G0/0/1
Answer: C
NEW QUESTION # 59
About the matching mechanism of ACL, which is correct? (Multiple choice)
- A. By default, the rule with the lowest number in the ACL stags searching. Once the rule is matched, the subsequent rule is stopped.
- B. If the ACL does not exist the result of returning the ACL is: no match
- C. If the last rule is found and the packet still does not match, the ACL matching result is mismatch
- D. Regardless of whether the result of the packet matching ACL is 'mismatch', "allow° or "roper, the packet is finally allowed to pass or refuse to pass, which is actually determined by each service module applying the ACL
Answer: A,B,C,D
NEW QUESTION # 60
On the switch, which VLANs can be deleted by using the undo command? (multiple choice)
- A. VLAN 4094
- B. VLAN 2
- C. VLAN 1
- D. VLAN 1024
Answer: A,B,D
NEW QUESTION # 61
Switches running STP, default switch priority
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 62
On the network shown in the figure, if all routers run OSPF, which router is elected as the BDR?
- A. Router A
- B. Router C
- C. Router D
- D. Router B
Answer: A
Explanation:
Explanation
NEW QUESTION # 63
Which of the following problems are caused by routing loops? (Choose three)
- A. Packets circulate between routers
- B. Slow convergence
- C. Router restarting
- D. Inconsistency of routing information
Answer: A,B,D
NEW QUESTION # 64
A gateway must be configured for communication between a host and other hosts.
- A. False
- B. True
Answer: B
NEW QUESTION # 65
DHCPV6 clients must obtain both IPv6 addresses and other configurations from the DHCPv6 server.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION # 66
Which of the following IPv6 addresses is a multicast address?
- A. FE80::2E0: FCFF: FEEF: FEC
- B. FC00.:2E0: FCFF: FEEF: FEC
- C. FF02::2E0: FCFF: FEEF: FEC
- D. 2000::2E0: FCFF: FEEF: FEC
Answer: C
NEW QUESTION # 67
......
Download Latest & Valid Questions For Huawei H12-211 exam: https://itexams.lead2passed.com/Huawei/H12-211-practice-exam-dumps.html
